female thread मीनिंग इन हिंदी

उदाहरण वाक्य

1. This equation only holds true if the screw and female thread materials are the same.
2. C-mount lenses provide a male thread, which mates with a female thread on the camera.
3. For example, a screw has male threads, while its matching hole ( whether in nut or substrate ) has female threads.
4. Less often, the standoff has a female thread in both ends and a second screw is used to attach it to the case.
5. This would require that there be extra material around the existing female threads to make larger threads, unless you could use the existing threads with another screw.
6. To pull the bit from the hole, either the female thread in the wood workpiece must be stripped, or the rotation of the bit must be reversed.
7. Some standoffs use the M3 female thread ( which faces the motherboard ) instead of # 6-32 UNC, and on a rare occasion a mixture of types can be used in the same case.
8. A " tap " is used to cut a female thread on the inside surface of a pre-drilled hole, while a " die " cuts a male thread on a preformed cylindrical rod.
9. It uses a male metric M12 thread with 0.5 mm pitch on the lens and a corresponding female thread on the lens mount; thus an S-mount lens is sometimes called an " M12 lens ".
10. Usually the standoff has a # 6-32 UNC male thread on one end which screws into a threaded hole in the case or motherboard backplate, and a # 6-32 UNC female thread in the other end which accepts a screw to retain the motherboard.